What is Hydro Jetting?

Hydrojet plumbing technology is now commonly used to remove stubborn blockages from your pipes and clear your drains rapidly and efficiently. If you have a blocked drain in your bathroom or kitchen, you may be worried and confused about what hydro jetting is and how it works. In the article below, you will find all the information about hydro jetting and hydrojet cleaning.

What is Hydro Jetting and Hydrojet Plumbing?

Hydro jetting also known as pipe jetting or hydrojet plumbing is a commonly used technique to eliminate layering materials, gathered impurities, dirt buildup on surfaces, and obstructions on pipes using high-velocity water pressure with the help of a jet nozzle. The strong force of the high-velocity pressurized water washes the impurities effectively. The hydro jetting process is used to clean areas that are not easily reachable. The procedure is also known as high-pressure water jetting. The term hydro jetting is also used to cover other categories, such as hydro jetting a sewer line and hydro jetting a clogged drain.

What is hydro jetting a sewer line?

Hydro jetting a sewer line is a process that is used to clean and unblock sewer pipes with high-pressure water. 1,500 to 4,000 PSI of water is inserted in the hose with a special nozzle to clean the sewer line.

What is hydro jetting a clogged drain?

Hydro jetting a clogged drain is a method in which 1,500 to 4,000 PSI of water is used to clear blockages and clean the inner walls of plumbing pipes.

• Cleaning tanks
• Removing blockages from filters
• Strainer cleaning
• Cleaning dirt and scales from heat exchanger tubes
• Cleaning rust from pipes
• Cleaning of automobiles from dirt, mud, dust
• Removal of remainder from steel trays

How Hydro Jetting Works?

In the process of hydro jetting, a plumber enters your plumbing and sewer system from a cleanout, which is an opening specially designed to have easy access to the system. Then the plumber inserts the camera and passes it through the pipes to check the location and nature of the blockage. The camera also measures distance, which helps in the effective placement of the nozzle. There are multiple jets in the nozzle that spray water in different directions, which cleans pipes so carefully and completely. The plumber decides the pressure rate of water according to what the camera discloses. About 1500 psi is normal, but if the blockage is too much, it may go up to 5000 psi, or around 20 gallons of water per minute. Different nozzles are used for different type of cleaning. Following are the normally used nozzle designs:

Flat jet nozzles. It has an extensive, slot-shaped hole that produces a water jet in a triangular, fan-shaped spray pattern.

Point jet nozzles have a round hole that discharges an accurate and focused amount of water.

Rotating nozzles have a rotating and spinning part that sprays to the sides and in straight direction. Rotating nozzles are the best nozzles for cleaning pipe walls after removing blockages.

Advantages of Hydro Jetting

Hydro jet drain cleaning is most safest and effective ways to clear obstructions from plumbing and sewer systems. The danger of destruction become lower with it, especially for older pipes, as compared to mechanical drain cleaners. The hydro jet cleaning service gives a lot of advantages; some of them are the following:

• Highly effective and useful method
• The method is environmentally friendly
• The hydro-jetting process is used for both domestic as well as commercial purposes
• No chemical is used in hydrojet
• A nontoxic and safe process with very little risk
• Non risky technique
• Further cleaning is usually not required normally
• Reliable and fast cleaning also in difficult-to-access parts

How Much Does Hydro-Jetting Cost?

The overall cost of hydro jetting a clogged drain and hydro jetting sewer line services is different in different regions. The cost of hydro-jetting can range from $300 to $800 for domestic plumbing systems. For industrial plumbing system cleaning and washing, the cost is normally higher and can range more than $2000 because it is a complex piping and equipment system.

Is Hydro Jetting useful in Residential Pipes and Sewer Systems?

Yes, hydrojet plumbing is a useful and secure process that can be normally used in residential pipes and sewer lines to clear blockages. Normally it is used in commercial areas like restaurants and industrial areas but it is equally successful in residential plumbing systems. Sewer jetting is a useful service that clears all debris from the pipes and stops future issues.

Final Thoughts

On the whole, we can say that hydro jetting is a safe, efficient, and environmentally friendly technique for cleaning and maintaining plumbing systems. It clears all types of blockages from drains and pipes and stops future damage to the plumbing system. From residential homes to large industrial sewer systems, hydrojet cleaning is equally safe for both.